If you’re in the market for a new graphics card and considering an upgrade, the RTX 4060 Ti is certainly one to watch. We got our hands on the KFA2 RTX 4060 Ti and put it through its paces, including performance benchmarks, overclocking, and undervolting. In this review, we’ll dive deep into its specifications, real-world gaming performance, and the efficiency of this new GPU, helping you decide if it’s the right upgrade for your gaming or productivity needs.
Key Features of the RTX 4060 Ti
Before we jump into the benchmarks, let’s first take a look at the specs of the RTX 4060 Ti and why it’s creating a buzz in the GPU market.
- GPU Architecture: Based on the Ada Lovelace architecture, the RTX 4060 Ti offers excellent performance and power efficiency, making it a great choice for gamers and content creators.
- VRAM: Equipped with 8 GB of GDDR6 VRAM, the 4060 Ti is designed for 1080p gaming, but it can handle 1440p gaming with ease. The 16 GB variant was also recently released, though 8 GB remains sufficient for most gaming scenarios.
- DLSS 3.0 Support: One of the standout features of the RTX 4060 Ti is its support for DLSS 3.0 (Deep Learning Super Sampling), which boosts frame rates and overall performance, especially at 4K resolution.
- TDP (Thermal Design Power): With a 160W TDP, the 4060 Ti is highly energy-efficient compared to previous generations, making it a good choice for those concerned with power consumption.
- Design & Cooling: The KFA2 RTX 4060 Ti features a dual-fan setup with RGB lighting. The 102mm fans provide good airflow while maintaining low noise levels, even under load.
Performance Benchmarks: 1080p, 1440p, and 4K
First, let’s dive into the stock performance. When we ran our stock benchmarks on the RTX 4060 Ti, we were impressed by its results. The core clock of the card hovered around 2,700 MHz, which is already higher than the official specs from Nvidia. This leads to unstable boost clocks unless we adjust the power limit to max. By doing so, the card becomes more stable and achieves better performance during demanding tasks.
Gaming Performance at 1080p and 1440p
During testing at 1080p and 1440p, the RTX 4060 Ti performed extremely well, delivering competitive results close to the RTX 3070. The price-to-performance ratio was also excellent, positioning this GPU as a solid choice for gamers who want high-end performance without paying for a more expensive card.
DLSS 3.0 at 4K
At 4K resolution, the DLSS 3.0 feature really shines. We saw an impressive improvement in frame rates, going from 16 FPS (unplayable) to a much more acceptable 70 FPS—a massive increase thanks to the upscaling technology.
Overclocking the RTX 4060 Ti
Now, let’s see how the KFA2 RTX 4060 Ti handles overclocking. To push the card further, we used MSI Afterburner to tweak the core clock and VRAM.
Overclocking Process
We started by increasing the power limit and temperature limit to their maximum values in MSI Afterburner. From there, we incrementally boosted the core clock by 10 MHz each time until we encountered crashes or artifacts in the benchmarks. The process was repeated for the VRAM, increasing it by 100 MHz at a time.
The stable overclock we achieved was a +240 MHz on the core clock and +1400 MHz on the memory clock. This resulted in:
- 1080p Benchmark: 4,487 points
- 1440p Benchmark: 3,519 points
This represents an over 10% increase in performance at 1080p and 1440p.
DLSS 3.0 Overclocking Results
For DLSS 3.0 benchmarks at 4K, we saw a 6% performance improvement, which is still quite substantial for 4K gaming.
- Highest Temperature: The GPU hit a maximum of 69°C under load, which is quite reasonable.
- Power Draw: The power draw peaked at 180W during overclocking—still efficient, but higher than stock performance.
Undervolting the RTX 4060 Ti: A Better Option for Efficiency?
While overclocking can improve performance, undervolting the GPU can enhance efficiency without sacrificing too much power. Here’s how undervolting impacts performance and power consumption:
The Undervolting Process
Undervolting requires adjusting the core voltage and clock speeds to maintain stable performance at a lower power consumption. We started by reading the max core voltage and GPU clock during gaming, then used the curve editor in MSI Afterburner to lower the voltage by 25mV at a time.
We managed to achieve an undervolt at 975mV while maintaining the stock boost clock and stable performance. This resulted in a 15% reduction in power consumption, lowering it from 160W to just 135W—a remarkable gain in efficiency.
Power Efficiency Comparison
At the end of the undervolting process, the RTX 4060 Ti was drawing only 5W more power than an RTX 3050, yet it was almost twice as fast, showcasing the power of the new Ada Lovelace architecture.
Should You Buy the RTX 4060 Ti?
Now that we’ve covered the performance, overclocking, and undervolting results, let’s talk about the price and whether this card is worth the investment.
Price-to-Performance Ratio
The RTX 4060 Ti starts at around $400, which, while higher than some might expect for a card with 8GB of VRAM, is competitive when compared to similar GPUs in the market. KFA2’s version of the RTX 4060 Ti offers great build quality, higher clocks, RGB lighting, and excellent cooling, making it a solid value.
Should You Upgrade?
- From an older GPU (e.g., RTX 10/20 series): If you’re using an older card like the RTX 2060 or RTX 1070, upgrading to the RTX 4060 Ti is a fantastic choice, offering significant performance gains and the addition of DLSS 3.0 support for future-proofing your setup.
- Already on a 30 series GPU? If you already own a RTX 3060 Ti or RTX 3070, you may want to wait for the RTX 50 series before upgrading unless you’re specifically looking for DLSS 3.0 and better power efficiency.
Final Verdict: Is the RTX 4060 Ti Worth It?
The RTX 4060 Ti offers excellent performance and efficiency at a competitive price. If you’re gaming at 1080p or 1440p, this card is an excellent option for the price and provides future-proof features like DLSS 3.0. Overclocking it further enhances its performance, and undervolting can help save power while maintaining stable gameplay.
If you’re looking for high performance at a good price, the RTX 4060 Ti is definitely worth considering. However, if you already own a high-end 30 series GPU, you may want to hold off until the next generation of cards.
